1 unit
FOSSiBOT F1800
1,024 Wh nominal capacity and 1,800 W AC. Runtime depends on consumption.
Check product and price ↗Spaziou · equipment selections
Three selections.
Choose your starting point.
Three ways to equip your campervan, from portable equipment to a fixed installation. Compare the selections, check what is missing and budget item by item.
Each product is bought separately from its retailer. This is not a complete installation kit or a single shopping basket. Affiliate links: Spaziou may receive a commission. Documentation reviewed: 17 October 2026.
01 · Lower initial investment
Short breaks · portable equipment
For starting without building a fixed electrical installation. Power, cooling and storage you can remove from the vehicle.
1 unit
FOSSiBOT SP200
200 W folding panels. One unit; do not add panels in series without recalculating.
Check product and price ↗
1 unit
Alpicool C20
20 L compressor fridge with 12/24 V supply. We selected this actual capacity, not a 30 L fridge.
Check product and price ↗
1 unit
ATHLON TOOLS XXL 60 L
Advertised capacity: 60 L. Measure your boot and allow for secure restraint while driving.
Check product and price ↗What we have checked and what you need to verify
The F1800 accepts solar input of 12–60 V, up to 15 A and 500 W. The SP200 lists Voc 21.6 V and Isc 13.3 A: the pairing is within those reference limits. Cold-weather margin, polarity, the MC4→XT60 cable and accessories for the purchased version still need checking. For the fridge, confirm the 12 V cable and combined loads on the station’s DC output.
What is missing to complete the installation
Solar cable/adapter if not included, transport restraints and ventilated space. This selection does not guarantee two days of autonomy or exemption from approval requirements if you modify the vehicle.
Your budget · prices entered by you
These are not live prices. Enter each item’s unit price; we multiply by the stated quantity. Shipping, labour and approval costs are added only if you include them in the allowance.02 · Medium investment
Long trips · fixed installation
A 12 V leisure system with a 100 Ah battery, charging while driving and solar panels deployed when parked.
1 unit
LiTime 100 Ah H190 Bluetooth
100 Ah and 1,280 Wh nominal capacity. Low-temperature charging protection does not mean self-heating.
Check product and price ↗
1 unit
Victron SmartSolar MPPT 100/30
Separate controller for charging the leisure battery. Set the LiFePO₄ profile according to LiTime’s instructions.
Search for the product on Amazon ↗Search link: check the model and variant in the results.
1 unit
Victron Orion XS 12/12-50A
Adjustable DC-DC charger. Do not buy it assuming the alternator can provide an extra 50 A.
Search for the product on Amazon ↗Search link: check the model and variant in the results.
1 unit
ALLPOWERS SE200
200 W portable panel for stationary use. Connect it to the MPPT, never directly to the battery.
Check product and price ↗
1 unit
HX-50B · terminal crimper
Advertised range: 6–50 mm². Suitable only if it covers the terminals, dies and final cable cross-sections.
Check product and price ↗What we have checked and what you need to verify
The proposal pairs one SE200 (Voc 48.96 V; Isc 5.33 A) with a SmartSolar 100/30 (100 V maximum PV input; 35 A PV short-circuit current; 440 W nominal at 12 V). Published specifications leave a margin, subject to cold-weather Voc correction. The H190 lists 100 A maximum and 20 A recommended charging current: coordinate combined MPPT + DC-DC charging with your chosen charging strategy, temperature and manual. Also limit the Orion to the alternator’s actual available capacity.
What is missing to complete the installation
Cable lengths, fuses and holders, isolator, busbars, fixings, terminals and installation. No inverter or 230 V installation included. The panel is portable; a roof panel needs a different selection and a review of the conversion.
Your budget · prices entered by you
These are not live prices. Enter each item’s unit price; we multiply by the stated quantity. Shipping, labour and approval costs are added only if you include them in the allowance.03 · Higher investment and scope
Large van · project base
More electrical reserve and an initial ventilation and water selection for Ducato, Crafter or Sprinter. Exact measurements still determine suitability.
1 unit
LiTime LiFePO4 12V 200Ah Plus
200 Ah and 2,560 Wh nominal capacity. Check this variant’s dimensions, installation requirements and temperature limits.
Check product and price ↗1 unit
Victron SmartSolar MPPT 100/30
One 100/30 unit for the proposed 400 W solar setup at 12 V.
Search for the product on Amazon ↗Search link: check the model and variant in the results.1 unit
Victron Orion XS 12/12-50A
Limit input/output current according to alternator, wiring and battery.
Search for the product on Amazon ↗Search link: check the model and variant in the results.2 units
ALLPOWERS SE200
Two identical SE200 panels in parallel, deployed when parked. Do not connect them in series with this design.
Check product and price ↗
1 unit
Victron SmartShunt 500A
Monitor battery bank current and energy. Install according to the manufacturer’s diagram.
Check product and price ↗
1 unit
Fiamma Turbo Vent Crystal · Polar Control
Ventilated rooflight. Check opening dimensions, roof thickness and variant before cutting.
Check product and price ↗
1 unit
SHURFLO 2088-554-144
12 V pump. Check pressure, taps, water heater and all circuit fittings.
Check product and price ↗
1 unit
Fiamma A20 · black accumulator tank
Expansion vessel. Coordinate settings and connections with the pump.
Check product and price ↗1 unit
HX-50B · terminal crimper
The tool must cover all final cable cross-sections; you may need another size range.
Check product and price ↗What we have checked and what you need to verify
Two SE200 panels in parallel retain a Voc of 48.96 V and add up to an Isc of 10.66 A at nominal conditions. Combined output: 400 W. These are below the nominal limits of the 100/30 at 12 V; check tolerances, cold-weather Voc, branch protection and connectors. Do not connect two in series: Voc would approach 100 V before allowing for cold and tolerances. Battery, MPPT and DC-DC need coordinated charging profiles and combined current limits.
What is missing to complete the installation
Insulation and quantities according to surface areas, tanks, pipes, fittings, electrical panel, cables, protection, fixings, joinery, installation and vehicle approval. No inverter or 230 V circuit included. For fixed roof solar, redesign the panels, layout, mounting and documentation before buying.
Search for Kaiflex insulation on Amazon ↗ · Choose thickness, area and adhesive for your project; this search does not specify a quantity.
Your budget · prices entered by you
These are not live prices. Enter each item’s unit price; we multiply by the stated quantity. Shipping, labour and approval costs are added only if you include them in the allowance.Consumption and measurements first; buying comes afterwards. Check the available space and check manuals, fixings and documentation with the professional who will carry out the installation.